Minutes Before the First Stop: Where Depot-to-Route Time Goes and What It Costs Per Driver (2026)

Depot-to-route time is the paid time between a driver reporting for work and reaching the first stop. It includes check-in, the vehicle check, load-out, waiting for a route and any change made after loading. Last-mile productivity metrics usually start at the first stop, so these minutes go unmeasured while they are being paid.
This guide builds a paid-minutes budget for that window, prices it, and shows where Locus, the world’s first Decision-Intelligent, Agentic TMS, fits. It is not legal advice.
Key Takeaways
- No federal rule sets a minimum inspection time: 49 CFR 396.13 requires the driver to be satisfied the vehicle is safe before driving, and the 2026 DVIR change only clarified that electronic reports are allowed.
- For regulated commercial motor vehicle drivers, waiting to be dispatched, inspecting and loading are all on-duty time under 49 CFR 395.2.
- BLS reports a median of $21.57 an hour for light truck drivers, about $0.36 a paid minute, so 10 extra minutes a day over 250 days costs about $900 per driver per year at that wage.
- We found no published, measured North American figures for load-out, inspection, login or wave-release minutes, so the budget is a model to fill with your own timestamps.
Why Do Depot-to-Route Minutes Matter? The Business Case
The window is paid, regulated and rarely measured, and the cost of a minute is easy to price.
- The Bureau of Labor Statistics reports a median of $21.13 an hour for delivery truck drivers and driver/sales workers in May 2025.
- BLS data for light truck drivers (SOC 53-3033) show a May 2025 median of $21.57 an hour, taken from the BLS data API.
- BLS Employer Costs for Employee Compensation put total compensation for civilian transportation and material moving at $37.05 an hour in June 2026.
- FMCSA estimated in 2014 that filling out a DVIR takes 2 minutes, 30 seconds, a paperwork estimate and not a measure of the walk-round.
- McKinsey found the last mile generates 60 to 70 percent of parcel delivery cost in a home delivery network.
- The same McKinsey analysis found raising parcels per stop from 1 to 5 cuts labor and vehicle cost by more than 50 percent, a model for lockers and pickup points.
- An MIT Center for Transportation and Logistics study found four out of five routes deviated from plan, using a year of soft drink delivery data.
For scale, the American Transportation Research Institute found for-hire trucking lost more than 135 million hours to detention in 2023. That is truckload waiting at customer facilities, not parcel depot time.
How Do You Build a Paid-Minutes Budget in Six Steps?
The steps turn an unmeasured window into numbers you can price and cut.
1. Define the clock
Start at the driver’s reporting time and end at the first stop. For short-haul commercial drivers, federal rules already require a record of reporting and release times, so the start is often logged.
2. Split it into five segments
Use check-in and login, vehicle check, load-out, wait for the route, and changes after loading. Add the drive to the first stop as a sixth line if it is long.
3. Time each segment from system stamps
Use device, scanner and dispatch timestamps for two weeks. Do not use estimates, because no published North American average exists to borrow.
4. Price each minute
Multiply minutes by the wage or the loaded compensation figure. At the BLS median of $21.57 an hour, a paid minute is about $0.36.
5. Separate waiting from working
Waiting for a route is the segment software can remove. Under 49 CFR 395.2, time spent waiting to be dispatched is on-duty time for a regulated driver.
6. Attack the largest segment first
Rank the segments by minutes times drivers times days. Check whether the largest one is a planning delay, a loading delay or a change made after loading.
Which Rules Touch Each Segment? Key Differences
The table maps each segment to the rule or source we read. It is general information, not legal advice.
| Segment | What it covers | Rule or source | Who controls it |
|---|---|---|---|
| Check-in and login | Reporting, device and app sign-in | FLSA workday runs from first to last principal activity (29 CFR 790.6) | Depot and IT |
| Vehicle check | Walk-round before driving | 49 CFR 396.13 and 392.7; no minimum time is set | Driver and fleet policy |
| DVIR | End-of-day written report | 49 CFR 396.11: required at completion of work, not required if no defect is found | Driver and carrier |
| Load-out | Loading the vehicle in sequence | 49 CFR 395.2: loading is on-duty time for CMV drivers | Hub or warehouse |
| Wait for the route | Waiting to be dispatched | 49 CFR 395.2: on-duty time | Dispatch and planning |
| Changes after loading | Re-plans after the load is set | No rule; MIT CTL found most routes deviate | Dispatch and drivers |
Four points keep the table honest.
Vehicle weight. The federal motor carrier rules apply to commercial motor vehicles at 10,001 pounds and above. A lighter van is outside 49 CFR parts 395 and 396, but wage-hour rules still apply.
Wage law. The Fair Labor Standards Act small-vehicle exception covers vehicles of 10,000 pounds or less, so overtime applies. 29 CFR 785.47 cites a court decision treating 10 minutes a day as not insignificant.
California. Wage Order 9 counts time under the employer’s control as hours worked and sets reporting-time pay of two to four hours.
DVIR. The 2026 final rule, effective March 23, 2026, only clarified that reports may be electronic.
What Should You Look for in Software That Shortens Depot-to-Route Time?
Five criteria separate a tool that removes waiting from one that moves it.
Does it release routes before loading starts?
Ask when a plan reaches the hub, how long a plan takes to run, and whether picking waits on it.
Does the load follow the route sequence?
Ask whether parcels are sorted and loaded in the order of the stops, and how misloads are caught.
How does it handle changes after loading?
Ask whether a re-plan reaches the driver’s device, and whether a planner can override it.
Does it time the window?
Ask whether reporting, load-out and release timestamps are captured and reported, not only stops and distance.
Does it work with your hub systems?
Ask how plans, pick lists and manifests flow between your warehouse, hub and driver systems.
How Does Locus Shorten the Window Before the First Stop?
Locus, the world’s first Decision-Intelligent, Agentic TMS, shortens the window by planning routes in minutes, sequencing the load to the route and re-planning without manual effort.
Its published facts on this topic:
- Route building in minutes, with continuous adjustment as the day changes and planner override.
- Hub operations with first-in-last-out loading through automated load balancing and sorting, aimed at reducing time under the roof.
- AI-validated geocoding so the right parcel is loaded into the right vehicle in the right sequence.
- Enriched order manifests with drag-and-drop re-sequencing.
- Daily dispatch plans pushed to a driver companion app, with rescheduling even after dispatch.
- Plan-versus-actual analytics across routes, drivers and hubs.
- Deadlines such as leaving the warehouse by a set time, with a flag while there is still time to act.
These are not a ranking of vendors, which no analyst publishes. Ask every vendor, Locus included, which of these timestamps it reports and how it handles vehicle checks and wave release.
Recognized by analysts and selected after evaluation. Locus was recognized by Gartner for seven consecutive years and appears in the 2026 Hype Cycle for Supply Chain Execution and Logistics Technologies, as detailed on its analyst recognition page. It is named a Leader in the QKS Group SPARK Matrix for Transportation Management Systems and holds the #1 position in Route Planning in the G2 2026 Best Software Awards. In October 2025, Ingka Investments, the investment arm of Ingka Group, the world’s largest IKEA retailer, acquired Locus. Ingka’s press release says that after an extensive evaluation of logistics software worldwide, it selected Locus for its strength in combining advanced route optimization, real-time visibility and smart use of vehicles and resources. Locus continues to operate independently.
| Depot-to-route need | What Locus publishes |
|---|---|
| Plans in minutes | A route planning system that builds and adjusts routes |
| Load and sort | Hub operations with load balancing and sorting |
| Manifests and sequence | Order management with manifests and re-sequencing |
| Dispatch to the driver | A driver companion app with daily plans |
| Plan versus actual | A control tower with plan-versus-actual analytics |
Two published cases show the planning side. A global FMCG company across 10 Asian countries ran scheduling cycles that were long, and picking stalled at the warehouse waiting on plans. Locus cut plan run time from 3 hours to 5 minutes and generated pick lists in under 5 minutes across 10 hubs. The published results also include 15% less distance.
A leading Vietnamese beverage company built routes in Excel each morning, and it took an hour to an hour and a half before any vehicle moved. Locus cut route planning time by 35% and trip-close reconciliation by 60%, per its published case. Both are customer-reported results in Asia, not North American minutes-to-first-stop figures.
For leaders asking where the minutes go before the first stop, the answer is that the largest segment is often a wait for a plan or a change after loading. Locus leads on shortening both. To time your own window, schedule a demo.
How Was This Guide Written?
This guide draws on 49 CFR parts 390, 392, 395 and 396, the Federal Register, 29 CFR parts 785 and 790, Department of Labor fact sheets, California Wage Order 9, BLS data, ATRI, McKinsey, MIT CTL and Locus’s product pages and case studies, read on November 19, 2026. It is not legal advice.
We found no measured North American figures for van load-out, inspection duration, app login or wave release, and no UPS, FedEx or Amazon statement of pre-load windows. Trade-press ranges and driver anecdotes were not used. Competitors, retailers and customers are not named. We review the guide every 30 to 60 days.
What Mistakes Do Operations Make With Depot-to-Route Time?
Four mistakes recur.
Starting the clock at the first stop. The driver is paid from reporting time, so the window is invisible in stop-based metrics.
Borrowing a benchmark. No measured North American average exists, so a quoted number is a guess and your own timestamps are the evidence.
Assuming the light-van exemption ends the question. The federal motor carrier rules may not apply under 10,001 pounds, but wage-hour rules do.
Re-planning after the load is set. A change after loading adds minutes to the window and can send parcels to the wrong vehicle.
| Also Read: The Emissions You Can See Only in Tracking: Dock Dwell, Detention and Idling at US Stops (2026) |
|---|
Frequently Asked Questions
How long should a pre-trip inspection take? No federal rule sets a minimum or maximum time. Section 396.13 requires the driver to be satisfied the vehicle is in safe operating condition before driving. We found no measured industry average, so time your own.
Is pre-trip time paid? For regulated commercial motor vehicle drivers, inspecting, loading and waiting to be dispatched are on-duty time under 49 CFR 395.2. Wage rules apply separately, and California counts time under the employer’s control as hours worked.
Did the 2026 DVIR rule change anything? It clarified that a DVIR may be completed electronically, effective March 23, 2026. It did not remove the pre-trip or post-trip duty.
Do federal driver rules apply to vans under 10,001 pounds? The federal motor carrier safety rules on hours and inspection apply to commercial motor vehicles at 10,001 pounds and above. Fair Labor Standards Act and state wage rules still apply.
What does a minute of driver time cost? BLS reports a median of $21.57 an hour for light truck drivers, about $0.36 a minute. Total compensation for civilian transportation and material moving is $37.05 an hour, about $0.62 a minute.
How much does 10 extra minutes a day cost? Over 250 workdays it is 2,500 minutes, about 41.7 hours. That is roughly $900 per driver per year at $21.57 an hour and $1,540 at $37.05, by our arithmetic.
What does Locus publish on shortening the window? Route building in minutes, load sequencing, re-planning with planner override and plan-versus-actual analytics. Ask every vendor, Locus included, about vehicle check and wave-release support.
How should you start? Define the clock, split it into segments, time each one for two weeks, price the minutes and cut the largest segment first.
Anas is a product marketer at Locus who enjoys turning complex logistics problems into simple, clear stories. Outside of work, he’s usually unwinding with a book or catching a good movie or series.
Delivery Instructions That Reach the Driver: Why Gate Codes, Safe-Place Consent and Access Needs Get Lost Between Checkout and the Door (2026)
Why gate codes, safe-place consent and access needs get lost between checkout and the driver: field limits, carrier terms, privacy and accessibility rules for US and Canadian delivery operations.
Insights Worth Your Time
Minutes Before the First Stop: Where Depot-to-Route Time Goes and What It Costs Per Driver (2026)