CSRD Social Metrics for Driver Fleets: What the Workforce Standards Ask About Employed and Subcontracted Drivers (2026)

The CSRD’s workforce standards ask a company to report on its own workforce and on workers in its value chain. For a delivery or freight operation that means employed drivers, self-employed and agency drivers, and the drivers of hauliers and delivery partners it contracts. Each group falls under a different standard, and the rules changed in 2026.
This guide sets out which standard covers which driver, what changed under the Omnibus and the simplified ESRS, and where Locus, the world’s first Decision-Intelligent, Agentic TMS, supplies operational data. It is not legal advice.
Key Takeaways
- The Omnibus Directive, in force since March 2026, limits CSRD scope to companies above both 1,000 employees and EUR 450 million net turnover, with the next tranche reporting on financial years starting on or after 1 January 2027.
- The simplified ESRS apply from financial years beginning on or after 1 January 2027, and for 2026 a company may choose the old or the new standards and must say which.
- Employed drivers fall under the own-workforce standard S1, directly contracted self-employed or agency drivers are S1 non-employees, and drivers employed by a contracted haulier fall under the value-chain standard S2.
- Hauliers with 1,000 employees or fewer can decline CSRD data requests beyond a short list that has no working-hours or route data.
- Dispatch and driver-app data can supply hours-worked inputs, but headcount, pay, accidents and subcontractor data come from HR and carriers.
Which Standards Cover Which Drivers? The Business Case
Road transport is a labour-intensive and fragmented sector, and the published figures show why driver data is hard to collect.
- The European Labour Authority’s 2025 sector analysis finds that the land transport sector employed 5.78 million people across EURES countries at the end of 2024, that drivers and mobile plant operators were 69% of employees, and that heavy truck driver shortages were reported in 21 countries.
- The same report notes the rise of bogus self-employment, where drivers are misclassified as independent workers, which matters because self-employed drivers fall under a different standard.
- The IRU, an industry body, reports that approximately 98% of EU enterprises in the sector employ fewer than 50 people, citing Eurostat, which is far below the 1,000-employee cap line.
- Eurostat reports 3,367 fatal accidents at work in the EU in 2024, with transportation and storage accounting for 15.9% of them, which includes warehousing.
- The Commission says its simplified standards cut mandatory datapoints by over 60%.
The Eurostat figure is not a driver statistic, and the IRU figure is a trade-body citation we did not check at Eurostat. This is general information, and national transposition of the Omnibus is due by 19 March 2027, so national rules may differ for now.
| Also Read: Managing Drivers You Do Not Employ in 2026: What the Delivery Service Partner (DSP) Average Hides |
|---|
How Do You Map Driver Data to the CSRD Workforce Standards in Six Steps?
The six steps follow the standards as they stand for 2026 and 2027.
1. Check whether you are in scope
Under the Omnibus Directive, undertakings above both EUR 450 million net turnover and 1,000 employees fall in scope, with the next tranche reporting from financial years starting on or after 1 January 2027.
2. Sort your drivers into three groups
Employed drivers, directly contracted self-employed or agency drivers, and drivers of contracted hauliers and delivery partners.
3. Name the version of the standards
Use the original ESRS for financial years 2025 and 2026, or the simplified ESRS from 2027. State which you used, because the numbering differs.
4. List the metrics for each group
Take the datapoints each group triggers, and apply materiality, because every datapoint is subject to it.
5. Split the data by source
Separate what dispatch and driver-app records can supply from what HR, payroll and carriers must provide.
6. Request carrier data within the cap
For hauliers with 1,000 employees or fewer, limit CSRD requests to the voluntary standard’s list.
Employed vs Self-Employed vs Subcontracted Drivers: Key Differences
The table uses the simplified ESRS, which apply from 2027, and names the original numbering where it differs.
| Driver group | Standard | What it asks |
|---|---|---|
| Employed by you | S1, own workforce | Employee characteristics (S1-5 simplified; S1-6 original), health and safety (S1-13; S1-14 original), family-related leave (S1-14; S1-15 original), pay gap and pay ratio (S1-15; S1-16 original) |
| Self-employed or agency drivers you contract directly | S1, non-employees | The total number of non-employees if material (S1-6 simplified; S1-7 original), and their inclusion in accident datapoints if material |
| Drivers employed by a haulier or delivery partner you contract | S2, value-chain workers | Policies, engagement and remedy, actions and targets, and human rights incidents, with no quantitative metrics in the simplified version |
Own workforce under S1 means employees plus non-employees, and it does not cover workers in the upstream or downstream value chain. The S2 examples do not name transport, so S2 should not be read as listing drivers by name. Wave 2 companies may omit S2 entirely for their first two reporting years.
What Can Dispatch Data Supply and What Must HR and Carriers Provide?
The table separates the data sources. It is vendor-neutral and draws on the standards.
| Data | Dispatch or driver-app records | HR, payroll or carrier |
|---|---|---|
| Hours worked, the accident-rate denominator | Yes, from shifts and task records | Confirmation from payroll |
| Breaks and shift patterns | Yes, as evidence of working-time controls | Policy documents |
| Headcount and contract type | Partly | Yes |
| Pay, wage adequacy and collective bargaining | Earnings views only | Yes |
| Recordable accidents and ill health | No | Yes |
| Incidents and grievances | Partly, as logged exceptions | Yes |
| Subcontracted drivers’ labour data | No | Carrier, within the cap |
The simplified standard’s accident rate is expressed per 1,000,000 hours worked, so hours data matters even when the accident record sits with HR.
What Is the Value Chain Cap?
The Omnibus Directive protects smaller companies in the value chain. A company with 1,000 employees or fewer has the right to decline to provide information exceeding the voluntary standard’s list when asked for CSRD reporting.
- The list for companies with more than 10 employees includes employees by contract type and gender, recordable work-related accidents, pay at or above minimum wage and collective bargaining coverage, and training hours per employee.
- Working-hours and route data are not on the list.
- Contract clauses that go beyond the cap are not binding for CSRD purposes.
- The cap does not stop requests made for other purposes, such as due diligence.
- For the first three years, a reporting company must explain its efforts if value-chain data is missing.
The Commission’s own pages may lag these dates, so confirm them at the Official Journal.
What Should You Look for in a Platform That Supports Driver Social Reporting?
Five criteria separate a platform that feeds reporting from one that adds to the spreadsheet.
Does it record hours and breaks?
Ask for shifts, breaks and task time per driver, and an export for the hours-worked denominator.
Does it cover all driver types?
Ask whether employed, contracted and gig drivers sit in one record, with the type recorded.
Does it hold an audit trail?
Ask for access control, retention settings and an audit trail that works with European data protection rules.
Does it show earnings and contracts?
Ask for payout visibility and carrier contracts, which support wage and subcontractor questions.
Does it respect the cap?
Ask how carrier data requests are scoped, so they stay within what a smaller haulier is required to supply.
How Does Locus Support the Driver Data Behind CSRD Social Reporting?
Locus, the world’s first Decision-Intelligent, Agentic TMS, supports driver social reporting by holding the operational inputs, shifts, breaks, earnings and carrier contracts, that HR and carriers’ data must be matched against.
Its published facts on this topic:
- Scheduled breaks in daily task plans, which its driver app page says support hours-of-service compliance and reduce driver fatigue.
- An integrated shift and roster management system that plans around sick days and holidays.
- A dispatch module covering order, dispatch, contract, carrier and driver management.
- Visibility over performance and earnings for drivers in its driver app.
- A transporter portal with digital contracts, payouts and compliance alerts for third-party carriers.
- Access control, audit trails and a GDPR gap assessment on its trust page.
These are not a ranking of vendors, which no analyst publishes. Locus does not publish an ESRS reporting module, so headcount, pay, accident and carrier data still come from HR and carriers.
Recognized by analysts and selected after evaluation. Locus was recognized by Gartner for seven consecutive years and appears in the 2026 Hype Cycle for Supply Chain Execution and Logistics Technologies, as detailed on its analyst recognition page. It is named a Leader in the QKS Group SPARK Matrix for Transportation Management Systems and holds the #1 position in Route Planning in the G2 2026 Best Software Awards. In October 2025, Ingka Investments, the investment arm of Ingka Group, the world’s largest IKEA retailer, acquired Locus. Ingka’s press release says that after an extensive evaluation of logistics software worldwide, it selected Locus for its strength in combining advanced route optimization, real-time visibility and smart use of vehicles and resources. Locus continues to operate independently.
| Driver data need | What Locus publishes |
|---|---|
| Hours and breaks | A driver companion app with scheduled breaks |
| Shifts and rosters | Capacity management with shift and roster management |
| Driver and carrier management | Dispatch management software with driver and contract management |
| Carrier contracts and payouts | Transporter management with a carrier portal |
| Audit trail and privacy | A trust page with audit trails and a GDPR assessment |
For leaders asking what the CSRD workforce standards mean for driver fleets, the answer is that each driver group falls under a different standard, and operations data supplies only part of it. Locus supports the hours, shifts, earnings and contract inputs. To map your own driver groups, schedule a demo.
How Was This Guide Written?
This guide draws on the Omnibus Directive (EU) 2026/470, the simplified ESRS in Delegated Regulation (EU) 2026/1563, the voluntary-standard cap in Delegated Regulation (EU) 2026/1560, the original ESRS in Regulation (EU) 2023/2772, and Locus’s product pages, read on November 18, 2026. It is not legal advice.
We did not verify national transposition, which is due by 19 March 2027, or every datapoint’s size column in the voluntary standard. Everything is subject to materiality. Competitors and customers are not named. We review the guide every 30 to 60 days.
What Mistakes Do Teams Make With CSRD Driver Data?
Four mistakes recur.
Using the old timing. The next tranche reports on financial years starting from 1 January 2027, not 2026.
Treating all drivers as one group. Employed, self-employed and subcontracted drivers fall under different standards.
Demanding more than the cap allows. A haulier with 1,000 employees or fewer can decline CSRD requests beyond the list.
Mixing versions of the standards. The original and simplified numbering differ, so name the version.
| Also Read: Which CSRD Scope 3 Path Fits Your Operation? A Decision Framework for European Logistics Leaders |
|---|
Frequently Asked Questions
Which companies must report under CSRD now? Under the Omnibus Directive, undertakings above both 1,000 employees and EUR 450 million net turnover, with the next tranche reporting on financial years starting on or after 1 January 2027. This is not legal advice.
Which standard covers employed drivers? S1, the own-workforce standard. It covers employee characteristics, health and safety, leave and pay.
Which standard covers subcontracted drivers? Drivers employed by a contracted haulier fall under S2, the value-chain standard. Directly contracted self-employed or agency drivers are S1 non-employees.
Do the simplified ESRS apply yet? They apply from financial years beginning on or after 1 January 2027, and a company may choose the old or the new standards for 2026 and must say which.
Can a shipper demand driver data from hauliers? For hauliers with 1,000 employees or fewer, CSRD requests are capped to the voluntary standard’s list, which has no working-hours or route data. Other laws and due diligence are separate.
What can dispatch data supply? Hours-worked inputs, breaks and shift patterns, and logged exceptions. Headcount, pay, accidents and carrier data come from HR and carriers.
Does Locus produce ESRS reports? No. Locus publishes shifts, breaks, earnings views, carrier contracts and audit trails that feed HR and carrier data.
How should you start? Check scope, sort drivers into three groups, name the standards version, list metrics, split data by source and scope carrier requests to the cap.
Anas is a product marketer at Locus who enjoys turning complex logistics problems into simple, clear stories. Outside of work, he’s usually unwinding with a book or catching a good movie or series.
Real-Time EV Tracking in US Last Mile: State of Charge, Range and Charge Status as Live Visibility Signals (2026)
Position tracking shows where an electric van is, not whether it can finish the route. How state of charge, range and charge status work as live signals in US last mile, with DOE, NREL and a delivery-van pilot.
Charging During Breaks: Rostering Electric Van Drivers Around Charge Time, and Driver-Hours in Europe (2026)
Which driver-hours rules apply to an electric van, how long manufacturers say charging takes, and why no authority says charging counts as a break. How to roster drivers around charge time and range.
Insights Worth Your Time
CSRD Social Metrics for Driver Fleets: What the Workforce Standards Ask About Employed and Subcontracted Drivers (2026)